Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
2007-2013 Silverado/Sierra Extended Cab, Slip On Rocker Panel + Cab Corner Cover
12 reviews
$479.00
See more: Chevrolet / GMC
Quick Covers are plastic slip-on rocker and cab corner covers that return your truck to its original appearance for thousands less than traditional rust repair! Our installation process involves removing and treating the corroded area to help prevent and slow down rust. Quick Covers slide over the original factory rocker and cab corner. They are attached with automotive grade double sided 3M tape and pop rivets.
Made of tough ABS plastic, Quick Covers are the only slip on rust panels that offer complete coverage. No welding required.
These will not fit the 2007 OBS.
Quick Covers are available in two surface types;(select from drop down above)
- Smooth- Smooth Quick Covers must be painted before installation to ensure UV protection. The smooth covers are ready to be cleaned, primed, and painted right out of the box. (*some surfaces are pre-sanded as a courtesy*)
- Textured- The black textured finish resembles a spray on bed-liner. The textured covers have UV protective coating and are ready to install right out of the box.
What to Expect
- Left and Right Slip On Rocker Panel + Cab Corner Covers
- 3M Adhesive Tape
- Rivets
- Prep pads
- Detailed Installation Instructions
Coverage Area-
Quick Covers offer the most coverage of any other slip-on products on the market. The cab corner section covers from from the top body line of the cab corner to the lover pinch weld of the rocker and wraps a few inches around the back of the cab corner. The rocker section covers from the upper pinch weld to the lower pinch weld and from the back of the cab corner to the front fender.
*Quick Covers are not sold as individual pieces*
Available Separately:
- Quick Bracket Kit- For trucks with excessive rust on the inner rocker
- Smooth Starter Kit
- Textured Starter Kit
DISCLAIMER: THIS PRODUCT IS FOR COSMETIC USE ONLY. The nature of this product is to improve external appearance. It is NOT intended to substitute for structural or other necessary repairs. If you use or install this product on a vehicle, you must inform the owner or authorized driver that installation of this product must be disclosed to the next buyer or owner. Original Appearance Manufacturing, LLC is not responsible for any use of this product for any purpose other than for improving the external appearance of a vehicle.
Compatible vehicles
NBS= New Body Style
| GMC | Year | Body |
| Sierra 1500 | 2007 NBS-2013 | Extended Cab |
| Sierra 2500 | 2007 NBS-2013 | Extended Cab |
| Sierra 2500 HD | 2007 NBS-2013 | Extended Cab |
| Sierra 3500 | 2007 NBS-2013 | Extended Cab |
| CHEVROLET | Year | Body |
| Silverado 1500 | 2007 NBS-2013 | Extended Cab |
| Silverado 2500 | 2007 NBS-2013 | Extended Cab |
| Silverado 2500 HD | 2007 NBS-2013 | Extended Cab |
| Silverado 3500 | 2007 NBS-2013 | Extended Cab |
J
John Mazzone (Auburn, MA) 2008 GMC Sierra Extended-Cab from central Massachusetts. Driver-side rocker +40% gone and super-ugly - along with 80% of the underneath portion. Passenger-side rocker 20% gone. Purchased both the pre-textured covers and the quick-brackets. Needed to get creative with removing the original rust/rot mess. Nothing fancy - just a hammer, wire-brush and snips - and more hammer. Sprayed and greased the heck out of everything except where the tape goes. Once prepped - the install of the brackets and the covers was super easy. Perfect fit all around. Truck color is dark maroon - and the black pre-textured covers make the truck look brand new. Needed to skip the removal of the rear-door strikers - too far gone - too risky for getting them back together. Just snipped out the section of the covers and installed over strikers. Also a small adventure on the passenger side. The underneath was about 40% gone - so the quick-bracket was needed - but where the underneath was "good-ish" - somewhat of a challenge in a few spots with getting the rivets through both the original metal + the quick-bracket. In the few spots where the rivets did not work - just used a super-healthy glop of JB-Weld and a large Staples office clip. Looks funky from underneath - but they ain't coming off. Can't see them from the normal/side view. Awesome product - Highly recommended . . .
K
Kenneth French (Thomaston, CT) They worked well for the intended result. I wanted to make the truck look presentable,and this very much accomplished my end goal.
T
Todd Brann (Dayton, OH) I originally got the quick cover for the wrong model. Once it was discovered, OAM was great in getting me the proper item and in returning the wrong part.
K
Ken Benson They look and work so well I’m getting a set for my dodge !!
J
Joe Riley Look good installation easy directions good 😊
