1999-2006 Silverado/Sierra Extended Cab 4-Door, Slip On Rocker Panel + Cab Corner Cover
Quick Covers are plastic slip-on rocker and cab corner covers that return your truck to its original appearance for thousands less than traditional rust repair! Our installation process involves removing and treating the corroded area to help prevent and slow down rust. Quick Covers slide over the original factory rocker and cab corner. They are attached with automotive grade double sided 3M tape and pop rivets.
This kit will fit on the Extended 4-door which has 2 full doors and 2 half doors that fold out toward the back of the truck. These back doors can only be accessed when the front full doors are open. These will fit on the 2007 OBS. We do not currently sell any covers that will fit on the 3- door model of this year range.
Quick Covers are available in two surface types;(select from drop down above)
- Smooth- Smooth Quick Covers must be painted before installation to ensure UV protection. The smooth covers are ready to be cleaned, primed, and painted right out of the box. (*some surfaces are pre-sanded as a courtesy*)
- Textured- The black textured finish resembles a spray on bed-liner. The textured covers have UV protective coating and are ready to install right out of the box.
What to Expect
- Left and Right Slip On Rocker Panel + Cab Corner Covers
- 3M Adhesive Tape
- Rivets
- Prep pads
- Detailed Installation Instructions
Coverage Area-
Quick Covers offer the most coverage of any other slip-on products on the market. The cab corner section covers from from the top body line of the cab corner to the lower pinch weld of the rocker and wraps a few inches around the back of the cab corner. The rocker section covers from the upper pinch weld to the lower pinch weld and from the back of the cab corner to the front fender.
*Quick Covers are not sold as individual pieces*
Available Separately:
This product is for cosmetic use only. (Why?)
DISCLAIMER: THIS PRODUCT IS FOR COSMETIC USE ONLY. The nature of this product is to improve external appearance. It is NOT intended to substitute for structural or other necessary repairs. If you use or install this product on a vehicle, you must inform the owner or authorized driver that installation of this product must be disclosed to the next buyer or owner. Original Appearance Manufacturing, LLC is not responsible for any use of this product for any purpose other than for improving the external appearance of a vehicle.
Our Marketing Team Hates Us
Quick Covers panels fit so well, you can’t even tell they’re on. It’s difficult to show this in marketing pictures—most customers can’t believe it’s the same truck. The painted panels look like metal, and fit almost seamlessly onto the truck. Even the textured covers look like they might be a factory option. 11 years of experimentation has led to this day.
The History
At Shaffer’s Auto Body (the place where the idea of Quick Covers was born), our special power was performing top notch auto body repair with amazing customer service. We were one of the only shops willing to accept rust work. Our name spread far and wide as people came to get their rusty trucks fixed. But we hated it.
We love automobiles. It’s our passion. But pulling somebody's prized truck apart to fix a small part of it hurt us. At that time, there was no better option. Those who could afford it, shelled out thousands of dollars and left behind their vehicles for many days in the shop. We had to turn a lot of customers away.
There had to be a better way. We tinkered with experiments, each one better than the last but still not good enough. First came slip-on steel covers, then we started hand-forming custom covers out of stainless steel (so they would last longer before rusting again).
That was a phenomenal development, but it still wasn’t an affordable option for most truck owners.
Why Not Steel?
We considered dozens of materials, and then narrowed it down and tested 5 for rigidity, impact resistance, and quality of final finish. The ABS plastic was the clear winner in all these tests. Now, instead of hand-forming stainless steel panels we could use a state-of-the-art manufacturing process which brought the cost of production down immensely. Now we could provide all car owners with this amazing advancement—easy to install, affordable, and custom-fit to each vehicle. Part of us wanted to keep this amazing product for ourselves. But a larger part of us wanted to share this phenomenal development with automobile lovers all across the United States. We separated the product from the body shop, started a new LLC, and quickly built up a solid customer base.
Made in the USA 🇺🇸
When we started out, we had zero experience in plastic thermoforming - which is the manufacturing process we use to make our covers. We can’t share too much without giving away trade secrets, but what we can tell you is that making a product that looks and fits perfectly turned out to be an order of magnitude more difficult than we thought it would be. The engineering process and manufacturing process is something we failed at multiple times. We tried outsourcing several different times with different people , and spent tens of thousands of dollars. It was all for naught. The results were basically the same poor quality products that were already on the market. If we wanted to make a superior product, we learned the hard way, we’d have to make it ourselves.
Today, we design, engineer, and manufacture all our products in-house, right here in the USA.
GMC | Year | Body |
Sierra 1500 | 1999-2006 (+07 Classic) | Extended Cab |
Sierra 2500 | 1999-2006 (+07 Classic) | Extended Cab |
Sierra 2500 HD | 2001-2006 (+07 Classic) | Extended Cab |
Sierra 3500 | 2001-2006 (+07 Classic) | Extended Cab |
CHEVROLET | Year | Body |
Silverado 1500 | 1999-2006 (+07 Classic) | Extended Cab |
Silverado 2500 | 1999-2006 (+07 Classic) | Extended Cab |
Silverado 2500 HD | 2001-2006 (+07 Classic) | Extended Cab |
Silverado 3500 | 2001-2006 (+07 Classic) | Extended Cab |
My 2001 Chevy Silverado 1500 Ext Cab went from looking like a scummy old rust bucket destined for the junk yard at any second, to a customized gorgeous truck, no kidding. So after adding a couple of textured black rocker panel & cab corner covers from the genius inventors at OAM, then I used a clay bar system, a buffer with rubbing and finishing compound, and the scum is gone & the clear shines again. You may be thinking that I am off the subject, but nope I am not at all, because if I did not do the other work I mentioned to a truck that had the entire rocker panel and cab corners gone in it, I think my closer friends would have checked me in to the closest mentally ill facility, and I would not have fought it. Due to this being the first move toward restoration I decided to do on saving the old rusted bucket, was rebuild the cab corners & rocker panels using this OAM covers, I would have done nothing else. I must mention That I also purchased the rocker panel re-reinforcements, because if you don't have a rocker panel lip to pop rivet to, you end up with a wavy, uneven crappy workmanship looking bottom of your rocker, and don't blame the people at OAM, because in their tutorials & other advice areas, they stressed the crap out of this. Of course just like you, I was not going to spend even more money on what was only a hope at the time, till I realized this will be awesome looking, and I need that reinforcement for perfection, besides iIdidn't have a way to mount a step my wife requested without it, again a real life saver, cause my wife is 5' 2" and needs a bit of help getting in this and any truck. More importantly though, she is super hot and I hate to deal with her disappointment as it is so painfully unrewarding, but instead strive for honoring her requests, as it is quite the opposite effect than the one previously mentioned, I think you get my point here. ;) Anyways, thanks for your time, I promise I shot you straight here, and again Thank you OAM, your little plastic covers just saved another old trucks life, cause it is not the first one, no need for me to even ask.
I want to thank you for letting me order the rocker panels my truck looks so beautiful again and it is gorgeous they look fabulous and thank you so much for the rocker panel quick covers again thanks again I am so happy and blessed right now I can't be any blessing happy for my birthday thank you so much!!!
Body shop recommended and applied … great result!
1999-2006 Silverado/Sierra Extended Cab 4-Door, Slip On Rocker Panel + Cab Corner Cover
It’s a Christmas gift for my husband so I can’t rate it yet. I received it really quickly and from what I see it’s perfect. I hope it fits. Thanks Gloria Plummer
What a great gift for your husband, Gloria! You'll have to let us know how it looks after Christmas once it's installed.