'09-'14 F-150 Crew Cab Corner Cover

This product is not available.

Made in USA — built in Ames, Iowa
Fast ship: most orders fulfilled in 1–3 business days.
Find your fit in seconds: Year • Make • Model • Cab Config
DIY = More money in your pocket.

Description
Will this fit my vehicle?

Description

2009-2014 F-150 Crew | Cab Corner Kit | Includes cab corner covers for both sides.

Quick Covers are plastic slip-on rocker and cab corner covers that return your truck to its original appearance for thousands less than traditional rust repair! Our installation process involves removing and treating the corroded area to help prevent and slow down rust. Quick Covers slide over the original cab corner. They are attached with automotive grade double sided 3M tape and pop rivets.

Made of tough ABS plastic, Quick Covers are the only slip on rust panels that offer complete coverage. The low profile design makes the seam nearly invisible because it is tucked right into the factory body line. No welding required.

Quick Covers are available in two surface types;(select from drop down above)

Smooth- Smooth Quick Covers must be painted before installation to ensure UV protection. The smooth covers are ready to be cleaned, primed, and painted right out of the box. (*some surfaces are pre-sanded as a courtesy*)
Textured- The black textured finish resembles a spray on bed-liner. The textured covers have UV protective coating and are ready to install right out of the box.

What to Expect

Left and Right Cab Corner Covers
3M Adhesive Tape
Rivets
Prep pads
Detailed Installation Instructions

Coverage Area-

Quick Covers offer the most coverage of any other slip-on products on the market. The cab corner section covers from from the top body line of the cab corner to the lower pinch weld of the rocker and wraps a few inches around the back of the cab corner. The cover comes into the rocker about 5 inches from the inner cab corner.

Available Separately:

Smooth Starter Kit Includes: Rust Inhibitor, tools for installation, and Primer.
Textured Starter Kit Includes: Rust Inhibitor, and tools for installation.

*Quick Covers are not sold as individual pieces*

Return/Exchange Policy

DISCLAIMER: THIS PRODUCT IS FOR COSMETIC USE ONLY. The nature of this product is to improve external appearance. It is NOT intended to substitute for structural or other necessary repairs. If you use or install this product on a vehicle, you must inform the owner or authorized driver that installation of this product must be disclosed to the next buyer or owner. Original Appearance Manufacturing, LLC is not responsible for any use of this product for any purpose other than for improving the external appearance of a vehicle.

No other rust panel looks this good, without welding. (We've tested everything)

Most aftermarket accessories are easy to spot. They are designed to grab attention and act as a moving billboard for the brand. Quick Covers are different.

Quick Covers were invented in an auto body shop, and we asked our customers what they wanted, "Nothing flashy, I just want my truck to look new again".

In order to maintain a factory appearance the design is intentionally low profile. We don't even put a logo on our product. Why? Because... it's not a billboard, it's your truck. The end result is so subtle that it's nearly invisible because the seam is strategically tucked into the factory body line. After installation most people can't tell the difference from a rust free truck. This makes is difficult for our marketing team, because they are often accused of "photoshop" on social media when they post before and after photos. To good to be true? No, the photos are real, and they come directly from our customers who love their "new" trucks so much they can't help but share the results.

But good looks aren't enough. We wanted to provide a rust solution for everyone, so we made sure that Quick Covers can be installed in very little time with basic tools, no welder required.

Quick Covers are made of tough ABS plastic which will never rust. We're not the only company making plastic rust panels, but we are the only company that offers complete wraparound coverage of the entire cab corner, and a perfect fit.

Did we mention Quick Covers are made in the USA? Our manufacturing plant is located in Ames, Iowa where the people are nice, and a good reputation still means something.

Will this fit my vehicle?

Compatible Vehicles

FORD	Year	Body
F-150	2009-2014	SuperCrew

Restore the Look Without Breaking the Bank

Body shop rust repair means cutting, welding, repainting, and thousands of dollars in labor.

OAM Quick Covers are designed to slip over your existing rocker panels and cab corners to dramatically improve appearance without tearing the truck apart.

If your primary concern is aesthetic and you want to save time and money, this is the solution.

Original appearance. Lower cost. No fabrication shop required.

Precision Molding

Every OAM Quick Cover is molded for a specific year, make, model, and cab configuration.

Full Transparency

Non-structural cosmetic improvement.

Return to Original

Get re-acquainted with the original, factory-fresh appearance of your truck.

Never Temporary

Not a bandage. A clean, intentional solution that restores confidence for years into the future.

Precision Molding

Every OAM Quick Cover is molded for a specific year, make, model, and cab configuration.

Full Transparency

Non-structural cosmetic improvement.

Return to Original

Get re-acquainted with the original, factory-fresh appearance of your truck.

Never Temporary

Not a bandage. A clean, intentional solution that restores confidence for years into the future.

Frequently Asked Questions:

Quick Covers are installed with a combination of automotive-grade adhesive tape and fasteners.

Quick Covers are formed from virgin-stock ABS, a material often used by OEMs.

We develop and manufacture everything in Ames, Iowa USA. Thanks for supporting small town manufacturing!

Yes. Quick Covers can be installed easily, but we suggest a second pair of hands to help!

Ask your local body shops to reach out to us.

No. Quick Covers are delivered in raw plastic form at this time.

No. However, because Quick Covers are delivered in raw plastic form, they must be primed with a very specific product. Use of any other primer will result in adhesion issues resulting in paint cracks/peeling. For this reason, professional painting is strongly recommended.

No. Quick Covers are intended to be coated with a specialty raw plastic primer, which is intended to be applied directly onto the smooth plastic surface. It offers excellent adhesion and flex properties.

Smooth Quick Covers MUST be painted before installation. They have no UV protection, which means they can be damaged by sunlight. Painting them will provide ample UV protection. Textured Quick Covers DO NOT need to be painted. They have an additional UV coating to protect them from sunlight. We created this version specifically for people that don’t want to do any painting. They are lightly textured to match other automotive accessories like fender flares and bed rail caps.

We take the time to inspect each and every Quick Cover before it gets shipped out. Sometimes there are tooling marks created during the manufacturing process. Other times there are slight blemishes or small imperfections in the plastic. We sand these imperfections by hand to ensure a smooth surface for a quality painting job.

Quick Covers are delivered in raw plastic form, so a raw plastic-compatible primer must be used. We recommendPolyvance Bumper & Cladding Coat – Adhesion Primer. Part No. 3611-1

We recommend brushing a high-viscosity grease on any areas that can be reached by hand. For hard-to-reach areas (i.e. inside of rocker panels and cab corners) we recommend using the aerosol rust inhibitor Like90.

Quick Covers are designed for a perfect fit. If we made them any thicker they would rub on the doors of your truck when opening and closing. Our design is thin enough to eliminate those issues while still being thick enough to handle normal wear and tear. Quick Covers are made of ABS, which is a very tough plastic.

We suggest using a 1/8th bit for a pilot hole and then a 3/16th bit (rivet size) to finish off the hole. Starting with a pilot hole makes it easier to get through both the cover and the existing rocker and helps your bit last longer. Double sided drill bits can be purchased in our starter kits on our website.

We fulfill orders in 1-3 business days. Shipping takes anywhere from 1-7 business days depending on location. You will receive a tracking number to the email you use at check out at the time of fulfillment.

No, we do not currently have any covers that will fit any of these vehicles but we will be developing covers for these vehicles in the future. If you would like to be informed of their release, please file a product request Here.

Check out theCompatible Vehiclestab on the products page.

Request itHere

We do not yet have a dealer in Canada, but we do ship to Canada. Canadian orders can be placed on our website or you can call to order.

Canadian orders, are shipped, FedEx Ground. Our shipping rate for Canadian orders does not including taxes and fees which are assessed at the border. There is a Clearance Entry Fee (https://www.fedex.com/en-us/shipping/international-ground-canada.html) and there will be certain taxes due depending on your province (https://www.cbsa-asfc.gc.ca/travel-voyage/dte-acl/est-cal-eng.html). The provided links offer estimations for the total based on value and/or province. We can not gaurantee these estimates nor do we reimburse taxes and fees for Canadian orders. These charges will be billed to you by FedEx after you package has arrived.

Yes. Click Here for more information.

Ask it Here! We are happy to answer any and all questions.